77
TIMBER FRAME
7
A
End Base Plates - 2
B
Front/Back Base Plates - 2
C
End Top plates - 2
D
Front/Back Top Plates - 2
E
Studs - 14
F
Nogs - 11
G
Lintel - 1
TIMBER FRAME - BACK WALL
A
B
D
E
F
G
H
H
Front Roof Packer - 1
I
I
Centre Roof Beam - 1
Select:
1 x 4000mm Base Plate
1 x 4000mm Top Plate
5 x 2295mm Studs
2 x 732mm Nogs
2 x 1155mm Nogs
`
• Select one 4000mm base plate (Green), one
4000mm top plate (Red) and six studs (Yellow).
• Lay out the framing on a fl at surface as per the
diagram with the top plate at the top. Ensure
that the notches on the top and bottom plates
face outwards. Nail together using two 75mm
nails per join. You can use the nogs to position
the studs in the right position. (see diagram).
• Position nogs 1132mm up from topside of the
bottom plate to underside of the nog and nail in
place with 2 nails in each end.
111
8
1132
2385
4000mm
45
45
1155mm
45
732mm
45
45
1155mm
732mm
