SteelFusion Edge Installation and Configuration Guide
25
Powering On the Appliance
Installing and Configuring the SteelFusion Edge Appliance
Completing the Configuration Checklist
The following table lists the parameters you specify to complete the initial configuration of the Edge
appliance. Be prepared to provide values for these parameters.
Powering On the Appliance
This section describes how to connect the AC power and how to power on the appliance.
Caution:
In European electrical environments, you must ground (earth) the Green/Yellow tab on the power cord or risk
electrical shock.
To power on the appliance
1.
If your appliance has a master power switch, ensure that it is in the off position.
Appliance
Parameter
Your Value
SteelFusion Edge
(the
Primary Interface)
Hostname
IP address
Netmask
Default gateway (the WAN
gateway)
DNS IP address
Domain name for the appliance
Administrator password
SMTP server IP address
Events and failures notification
email address
Primary interface speed
Primary interface duplex
In-Path Deployments
In-path interface IP address
In-path netmask
In-path gateway
In-path: LAN interface speed
In-path: LAN interface duplex
In-path: WAN interface speed
In-path: WAN interface duplex
