4
riva Systemtechnik GmbH | Brunnenstr. 29 | D-78554 Aldingen
Tel.: +49 7424 90140-18 | Fax: +49 7424 90140-62 [email protected] | riva-filter.de
INSTALLATION GUIDE – riva DRINK WATER FILTER
Installation of a riva VARIO filter housing with integrated filter cartridge
under the sink or the kitchen sink.
Please note!
•
The housing must be connected in such
a way that the (cold) water input into the
filter housing is always in the direction of
the arrow. (arrow on VARIO housing)
• If the assembly is completed and the
housing with the hoses between the
cold water connection and the ar-
mature hose is tightened, the VARIO
housing can be placed freely depending
on the available space. Now the direc-
tion of the arrow no longer plays a role
as it is already connected in the correct
water flow/input direction.
•
Finally, run cold water through the kitchen
faucet and check that the tightness of all
connections.
•
If you have any further questions or need
support, please contact our service under the
following telephone number:
Tel. ++49 7424 90140-18
Filter system connection
Commissioning
3
•
Now place the riva VARIO filter system with
the flexible hoses between the angle valve/cold
water connection and the fitting connection.
•
Tighten all connections!
riva-filter.de
cold water connection
armature hose
Maintenance
The filter system is basically low-maintenance. However, the
maximum service life of the filter cartridges must be observed.
Clean and lime-free fittings are the prerequisite for hygienically
perfect drinking water. We recommend a cartridge change
after 6 months (DIN 1988) as well as an expert leak test of the
housing after a change has been carried out.
Guarantee
The housing is covered by a 24-month warranty. Wear parts
such as seals and filter cartridges
as well as damage due to improper use are excluded.
Example:
3 on top = next change
in March
(3rd month of the year)
Do not forget to change the cartridge - please use the sticker!
Use our removable riva sticker to make the next cartridge change
unforgettable!
Simply turn the month for replacement upwards and apply the sticker
on a smooth surface (inside of the cabinet, shelf, tile).
