RITE-HITE VBR-300 DOK-LOK Owner’s Manual
15
Operating Procedure
STORED
Barrier is in the STORED position. Inside light is flashing red
alerting forklift operator unsafe condition exists. Outside light is
flashing green alerting truck driver it is safe to back in.
• Before loading or unloading a vehicle at your loading
dock while using a
DOK-LOK
vehicle restraint, always
visually inspect to be sure that the barrier blocks the
R.I.G. assembly. If a condition occurs that cannot be
remedied by backing the trailer firmly against the dock
bumpers, secure the trailer by other means.
• Be sure that the area around the R.I.G. assembly is
free of plates or other obstructions.
• Always operate the
DOK-LOK
vehicle restraint from
the top of the dock.
• Inspect all restraint lights and horns daily to make
certain they work properly.
• Perform maintenance on restraints in accordance with
Maintenance on page 19
of this manual.
•
DOK-LOK
vehicle restraints should be operated only
by authorized personnel who have read and
understand the Owner’s Manual.
• Call
RITE-HITE
at (800) 456-0600 with any questions.
FAILURE TO FOLLOW THESE PROCEDURES COULD
ALLOW UNEXPECTED TRAILER/LOADING DOCK
SEPARATION RESULTING IN DEATH OR SERIOUS
INJURY!
WARNING
Figure 16
: STORED Position