Riso VALEZUS T2100, User Manual

Page: 32 / 56

30
VALEZUS T2100 User’s Guide
6
Close the right cover of the Double
Tray Stacker.
■
When Removing Only the Printouts
1
Open the right cover of the Double
Tray Stacker.
2
Remove the printouts.
3
Close the right cover of the Double
Tray Stacker.
• The position at which the stacking tray will
stop is configured in "Admin Menu" (p. 32).
To change the position to which the tray is
lowered, contact your administrator.
• Depending on the position at which the
stacking tray will stop, the printouts may
interfere with the guides making it difficult
to be removed. In such case, close the
right cover, press the stacking tray descent
button, and remove the printouts after the
stacking tray has been lowered.
• Depending on the size of the paper that
has been output, the printouts may
interfere with the handle of the carriage
making it difficult to be removed. In such
case, close the right cover, press the
stacking tray descent button, and lower the
stacking tray to the carriage. This will allow
you to pull out the entire carriage and
remove the paper.
• If the carriage has been pulled out in step
2, close the right cover after setting the
carriage back into the Double Tray
Stacker.
• When configured so that the stacking tray
is not lowered even after printing has
ended, if there is paper on the stacking
tray, the output guide is unable to move
and may not be able to support the size of
paper for the next job. Before printing jobs
of different paper sizes, paper orientations,
or paper tray settings, be sure to remove
the paper on the stacking tray.