Riso VALEZUS T2100, User Manual

Page: 22 / 56

20
VALEZUS T2100 User’s Guide
Printing
The print data sent to Print Controller is printed with
the system using "α stream".
1
Select data to print via "α stream".
2
Check the print settings via
"α stream".
3
Check the paper settings on the
Operation Panel 1.
You can check the paper settings on the [System
Info] - [Consumables] screen.
Also, make sure correct paper is inserted in the
specified feed tray, and the remaining amount of ink
is sufficient.
4
On the Print Controller, Click [Start].
Print data will be sent to the Printer 1 and Printer 2,
and the printing starts automatically.
1
Select data to print via "α stream".
2
Change the print settings via
"α stream".
3
Change the paper settings on the
Operation Panel 1.
You can change the paper settings from [Paper Tray
Setting] on the [System Info] - [Consumables]
screen. Also, make sure correct paper is inserted in
the specified feed tray.
Sending Print Data
• "α stream" is an output application that
processes print data. It is always running when
the power of Print Controller is on.
• For the printing method and settings of Print
Controller, refer to the guides of the Print
Controller.
• Be sure to check the remaining amount of
ink on the operation panel of their
respective printer.
• For more information on the printer
settings, see the guides of the printer.
• When printing stops by an error, click [Start]
again on the Print Controller after resolving
the problem following the instructions in the
displayed message.
Changing the Settings
• For more information on the printer
settings, see the guides of the printer.