Riso VALEZUS T2100, User Manual

Page: 29 / 56

27
Dedicated Equipment
VALEZUS T2100 User’s Guide
Configure to which position the standard tray is
lowered when the standard tray descent button is
pressed and quickly released or when the system
runs out of paper.
[Feed 1]
Configure the setting for the upper standard tray.
[Feed 2]
Configure the setting for the lower standard tray.
[Paper out]
[1], [2], [3], (Factory setting: [3])
[When Standard Tray Descent Button is pressed]
[1], [2], [3], (Factory setting: [1])
1
On the [Admin Menu] screen, select
[Printer] - [Double Tray Feeder].
The [Double Tray Feeder] screen is displayed.
2
Configure the settings.
3
Touch [OK].
The [Admin Menu] screen is displayed
Double Tray Feeder
• When [Paper out] is set to [3], the standard
tray is lowered to the bottommost position.
While it is possible to set a greater amount
of paper at once, this requires that you
squat when loading the paper in the lower
standard tray. When [Paper out] is set to
[1] or [2], the paper tray will stop before
reaching the bottommost position and thus
make it possible to load the paper while
standing.
• When the standard tray descent button is
pressed when the standard tray is at a
position lower than the configured lowering
position, the standard tray will be lowered to
the position of the next number.