Riso MH 9350, User Manual

Page: 25 / 218

Chapter 1 About This Machine
23
1
Control panel
1
[HOME] key (
A
24 )
Press this key to display the [HOME] screen.
2
Touch panel (
A
24 )
3
Numeric display
Shows the number of prints and the entered val-
ues for various settings.
4
[
U
] key
Press this key to open the [Job Memory] (
A
115)
screen and select an entry field in [Program]
(
A
109).
5
Numeric keys
Press these keys to enter the number of prints
and the values for various settings.
6
[C] key
Press this key to clear the entered characters and
numbers.
7
[P] key (
A
109 )
Press this key to open the [Program] screen.
When [Program] is turned on, the key lamp is lit.
8
[X] key
Press this key to select an entry field in [Program]
(
A
109).
9
[+] key
Press this key to select an entry field in [Program]
(
A
109).
0
[SPEED] keys (
A
96 )
Press these keys to adjust the print speed. The
lamp above these keys shows the current speed.
a
[DENSITY] keys (
A
97 )
Press these keys to adjust the print density. The
lamp above these keys shows the current print den-
sity.
b
[PRINT POSITION] keys (
A
98 )
Press these keys to adjust the print position after
master making.
c
[MASTER MAKING] key (
A
35 )
Press this key to display the master making basic
screen.
d
[PRINT] key
Press this key to display the printing process
basic screen.
e
[AUTO PROCESS] key (
A
28 )
Press this key to turn on / off [AUTO PROCESS].
When [AUTO PROCESS] is turned on, the lamp
above the key is lit.
f
[WAKE-UP] key
• When this machine is in the sleep (power sav-
ing) status, the key lamp is lit. Press this key to
activate this machine.
• When the authentication function (
A
149) is
enabled, the key lamp is lit while the user is
authenticated. Press this key to cancel the
authentication.
g
[PROOF] key (
A
35 )
Press this key to output a proof copy.
h
[START] key
Press this key to start the master making process
and the printing process as well as to start various
operations.
The key lamp is lit when the operation is available
and not lit when the operation is not available.
i
[STOP] key
Press this key to stop the operation in progress.
If this key is pressed while master making is in
progress, the operation stops after the master
making process is complete.
j
[RESET] key
Press this key to reset the current setting to its
default value or clear error displays after trouble-
shooting.
1
3
c d f e
7 8
h i g j 4 6 9 5
2 0 a
b