Riso MH 9350, User Manual

Page: 117 / 218

Chapter 5 Useful Functions
115
5
Using the Job Separator
[Job Separation]
1
Touch [Job Separation] in the
[Functions] tab screen.
Using the Registered Settings
[Job Memory]
Registering [Job Memory]
1
Set the required functions.
(
A
52 “Functions for Master Making”)
(
A
96 “Functions for Printing”)
(
A
108 “Useful Functions”)
2
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
3
Touch a button for which nothing
has been registered.
4
Check the settings.
Touch [
G
] to check all items to the end of the
list.
You can use the [Job Separation] function after
installing the optional Job Separator.
• When you print with [Auto Process] turned on
after placing originals on the auto document
feeder, turn on [Job Separation] to insert a piece
of tape each time the original changes.
• When you also use [Program] (
A
108) together, a
piece of tape is inserted in each separation of the
printing.
• When used with [Auto Page Renewal] (
A
101), a
piece of tape is inserted before master making
again.
For more information, see the user’s guide for the
Job Separator.
B
This function works only when [Program]
(
A
108) or [Auto Process] (
A
28) is [ON].
B
You cannot use this function with the fol-
lowing function.
C
[Slip sheet sorting] (
A
114)
B
You can change the default setting in [Job
Separation] (
A
138) under [Admin.].
You can register a set of required settings.
This function is useful as the same settings can be
retrieved for use.
B
You can also display the [Job Mem-
ory] screen by pressing the [
U
] key.
B
You cannot touch a grayed button
as the settings have already been
registered.