Riso MH 9350, User Manual

Page: 141 / 218

Chapter 7 Setting the Operation Conditions
139
7
[Jump Wing Control]
You can change the default setting of [Jump Wing Control]
(
A
106).
OFF, ON
B
[Jump Wing Control] is displayed only when the spe-
cial paper has been set in advance. For more infor-
mation, consult your dealer or authorized service
representative.
[Paper Ejection Adj]
You can change the default setting of [Paper Eject Adj] (
A
102).
[Air Blow]:
k
OFF, ON
l
OFF, ON
[Separation Fan]:
k
OFF, 1, 2, 3, 4
l
OFF, 1, 2, 3, 4
[Separation F+]:
l
OFF, 1, 2, 3, 4
[Scan Data Folder]
You can change the default setting of [Directory] (
A
131) in the
scanning mode.
1 to 6_FOLDER
[Quick Master Making]
You can change the default setting of [Quick Master Making]
(
A
59).
OFF, ON
B
When this setting is [ON], the default state of the [Pre-
view] (
A
83) is [OFF] even in dual-color mode.
[Scanning Side -ADF] *
You can change the default setting of [Scanning Side -ADF]
(
A
86) when single-sided originals are scanned with the optional
auto document feeder.
Front Side -> Simplex, Back Side -> Simplex
[Double Feed Check]
You can change the default setting of [D-Feed Check] (
A
106).
OFF, ON
[Slip sheet sort set.]
You can change the default setting of [Slip sheet sorting] (
A
114).
OFF, ON
B
Only either [Job Separation] or [Slip sheet sort set.] can
be turned on.
Setting item Description