7
EN
LEDS INDICATION
LEDS INDICATION
LEDS INDICATION
LEDS INDICATION
Key
Function
(Blue)
Communication with the panel
(Red)
On
: Fully or partially set
Slow flash
: Exit delay
Rapid flash
: Alarm
(Yellow)
Fault in the system while the system is unset.
SLEEP MODE
SLEEP MODE
SLEEP MODE
SLEEP MODE
For extending the battery life of the keypad, the keypad is designed with a Sleep mode
function. By default, 10 seconds after the last key has been pressed, the keypad will
turn off its display and LEDs. The time can be configured by your engineer to a
maximum of 60 seconds.
BATTER
BATTER
BATTER
BATTERY
Y
Y
Y ACTIVATION
ACTIVATION
ACTIVATION
ACTIVATION
Remove the batteries red strip to activate the batteries.
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to local regulations.
CHANGING KEYPAD PARAMETERS
CHANGING KEYPAD PARAMETERS
CHANGING KEYPAD PARAMETERS
CHANGING KEYPAD PARAMETERS
Any change performed in the definition of the keypad parameters requires to update
the keypad as well. This is performed by pressing the
key for 2 seconds. Doing so,
the panel will send an update to the keypad.
