Tap the hamburger button (
) and then tap the Exit button. This
will save the settings and
reboot the RIOT CloudLink device
after which it will return to its normal operating state.
After a few seconds the Status LED will turn off, signalling that it
has left config mode.
If the WiFi LED remains off after this process then it means that
the device is unable to connect to the network and you may have
typed the incorrect password for the selected AP.
If the WiFi LED stays flashing then it signals that it was able to
connect to the local AP (so the password is correct) but it is unable
to make a connection to the internet. This may be due to a firewall
blocking internet access or that the network may have reached its
data cap. This may be the case when the device is installed at the
guesthouse, office building or similar environment. Please consult
with the business IT department to allow internet traffic to and
from the RIOT cloudLink device.
Note: If needed, the device will download and install new firmware automatically. This will be indicated by the 3
“Status”, “Comm” and “WiFi'' LEDs flashing one at a time in sequence. This must not be confused with the signalling
of “Configuration mode” where the 3 LEDs are flashing on and off at the same time.
9
Summary of Contents for CloudLink
Page 3: ...RIOT CloudLink Device overview 2 ...
Page 16: ...3 Serial Pinout 15 ...
Page 17: ...4 Technical Specification 16 ...
