background image

02/12

58

For more information concerning the pump, you can find it in the enclosure de-

livered with this machine.

10.4  Hydraulic 

system

Renew oil 

Important!

You have to renew the hydraulic oil at least ones a year! 

Only use oil HESTIA 46.

Order number Rioned 71003500046

Check, every time before use, if the level of the oil is sufficient.

Proceed as follows:

1.

Stop the machine.

2.

Be aware that the machine is standing horizontal.

3.

Take the dipstick out of the oil tank.

4.

Clean the dipstick with a tissue.

5.

Put the dipstick into the oil tank.

6.

Take the dipstick back and watch at the dipstick if the oil is between 

maximum a minimum.

7.

Fill oil, if necessary.

8.

Fasten the dipstick onto the oil tank.

9.

Start the engine and let it turn for about 5 minutes.

10.

Stop the machine and repeat point 2 until 8.

10.5  Oil sepa-

rator

Drain the oil regularly. See sight glass (

 Oil separator

) or use the suction reel 

with hose.

10.6  Clean the 

vacuum tank

Before cleaning the dirt water tank always drain the tank.

1.

Open the back cover, unscrew the clamping bolts (

 Clamping bolts

); 

2.

Clean the vacuum tank; 

3.

Clean all pipes; 

4.

Clean the float ball;

5.

Close the cover.

10.7  Cleaning 

the vacuum 

pump

If the vacuum pump has sucked dirt water or dung you have to clean the pump 

with diesel oil. Uncouple the suction hose from the vacuum pump and fill the 

pump with 1/21 diesel oil. Then, after cleaning, fill the pump with 60 - 70 gram 

clean diesel oil. 

If you don't need the pump for a long period: 

Dissemble the hose between the vacuum tank and vacuum pump; 

Clean all parts; 

Shut the pump hermetically (inlet and outlet).

10.8  Mainte-

nance vacuum 

pump 

Check ones a year the overload valve on functioning; 

You can check this when you let the vacuum pump press. The pressure 

gauge may never come above the 0,8 bar. 

Change the pump blades if they are 10-15% damaged;

Check the blades ones a year or every 600 hours; 

Spool the oil tank ones a year; 

Spool the pump house every time after a long period of stoppage; 

Clean the protection of the vacuum pump ones a month; 

Summary of Contents for Flexcom













































































Reviews: