Rioned Flexcom, User Manual

Page: 21 / 76

02/12 21
Caution!
Before using a spray gun, you must always set the pressure below the
maximum (±the half of the maximum pressure). You must do this
before you start the machine. If the machine is running, the pressure
can be increased by turning the control wheel to his working pressure.
Never exceed the maximum pressure that is marked on the manometer
when using the spray gun.
1. Screw the spray gun including in the delivery onto the high-pressure
hose.
Fasten it by using the two spanners provided.
2. COMPLETELY unroll the high-pressure hose ( see chapter8.5 "Hydraulic
reel control" page.: 32 ).
3. Attach the spay lance gun. Secure the quick coupling tightly.
4. Check if the HP valve is open.
5. Press button (HP pump On).
6. Press button (Throttle open).
7. Screw the high-pressure regulator wheel upward on the high-pressure
regulator until the required working pressure is reached. The adjusted
pressure can be read from the pressure gauge on the machine when
the spray gun is open.
8. Pull the trigger of the spray gun.
Stop spraying
1. Release the trigger of the spray gun.