10
Assemble the Roof Pediments
Assemble all parts of
the hinged door
pediment except for
the 7A connector and
the R3 profile.
Note:
Glazing
elements (RA, RB, RC,
and RD) may have been
placed inside the E2
profiles. Remove them
before assembly.
Slide the PN6 panel
into the open space of
the pediment.
Note:
The outside
surface of the panels
have special UV
protection, indicated by the plastic identification strip. Remove plastic ID strips when as panels are locked in
place.
Complete the hinged door pediment with the 7A connector and the R3 profile, taking advantage of the
flexibility of the profiles.
Lock the pediment in place using pins an d remove the ID strips from the panel.
Complete Doorway Pediment
Attach the E4 and R2
profiles to the lower right
pediment.
Note:
Glazing elements
(RA, RB, RC, and RD) may
have been placed inside the
E4 profiles. Remove them
before assembly.
Slide the PN5R panel in
place. Make sure that the
plastic ID strip faces out.
Connect the 4A and 09
connectors to an E2
profile and put it in place
taking advantage of the
flexibility of the profiles.
Lock the panel in with
pins.
Assemble the lower left
pediment in the same
way.
