16
Making sure
that the
plastic ID
strip faces
out, slide a
PN2A panel
into the
lower RD1
element.
Bend the
panel until it
enters the
upper RD1
element.
Continue
with the rest
of the PN2
and PN2A
panels.
Lock the
lower panels
into place
using RC1
glazing
elements.
Make sure
that the end
of the RC
glazing
elements are
in line with
the bottom
of the RD
elements.
Note:
The
RC1 glazing
elements may
have been
placed inside
one of the long
profiles.
Important:
In order to maintain the life of your greenhouse, it is essential to insert glazing elements
fully and completely, using soapy water, as explained on page 2.
Remove the remaining plastic ID strips from the panels.
PN2A
PN2
PN2A
PN2A
PN2
PN2A
