manualshive.com logo in svg

Rinnai ROF4100, Operation & Installation Manual, Page: 20 / 28

Share
Download
Rinnai ROF4100 Operation & Installation Manual Download Page 20

Rinnai Australia

- 17 - Rinnai Luminaire® Outdoor Gas Fire - Operation and Installation Manual

Door Assembly Installation Instructions

The assembly is comprised of tempered glass double bi-fold doors with stainless steel surrounds and 
fixings. This offers wind protection when the unit is on and when not in use protection from wind, rain 
and nesting animals.
The assembly fixed to the cabinet frame of the Rinnai Luminaire Outdoor Fire, so is only suitable for 
installations where a cabinet (also called a body assembly) has been installed.

The unit can operate with the doors open or closed, however for best radiant heat the doors should 
be open during operation.
Suitable for Non Combustible cladding and frame materials.

Rinnai accepts no responsibility for deterioration of cladding or finishes.

Cabinet installation - door assembly is suitable

Only has a burner assembly installed - door assembly 

IS NOT

 suitable.

If the doors are closed during operation DO NOT touch the glass. 

The glass can reach very high temperatures and cause severe burns.

Young children should be supervised at all times when the unit is in 
operation.

WARNING

DOOR ASSEMBLY

Summary of Contents for ROF4100





























Reviews:

No comments