MAINTENANCE
✻
Wipe the stainless steel components with a soft, damp cloth and mild detergent.
✻
Wash the pan supports and drip pans in warm water and detergent.
TROUBLESHOOTING MANUAL FOR
RJ-9600S-MC, RJ-9600E-MC GAS HOTPLATE
Fault
Cause
Remedy
1. No ignition
1.1 Spark electrode is wet especially
in seasons of high humidity.
Dry the electrode with tissue or dry cloth.
1.2 Sparking becomes slow when
battery runs down.
Change battery and place it into battery
box correctly.
2. Flame cannot be held
Ignition button has not been fully
pressed.
Push button fully. Hold for a few seconds
until flame is ignited.
3. No main flame
Gas meter cock and/or appliance
isolating cock have been turned off.
Open gas meter cock and/or appliance
isolating cock completely.
4. Yellow flame
Accumulated grease and dirt on
burner head.
Wash burner head in warm water with
detergent. Dry it and then place it back at
correct position.
5. Unstable flame
Incorrect location of burner head.
Refit burner head into burner body.
JK0031-015
×
01 (00)
06000005111090
Printed in Japan
2013.10
