2
BEFORE USING THE GRILLER
•
Preparation Before Use
•
Ensure that the type of gas (gas
group) supplied is same as the one
mentioned on the nameplate of the
appliance.
Gas valve
•
Prepare a dedicated gas valve for this appliance.
•
If there is no gas valve in the installation location or the gas valve is not appropriate, the gas valve needs
to be newly installed, relocated or replaced. Consult your dealer or gas operator.
Gas connection
•
RGA-404B, 404C
RGA-406B,
406C
RGA-408B,
RGA-408C
are rubber hose connection type.
•
The connection port diameter is
ø9.5mm hose end.
RGA-408: Natural gas
Gas other than LP gas:
ø13mm hose end
•
Do not connect additional rubber
hose or branch out the hose.
•
Use a gas rubber hose only.
Never use any vinyl hose.
(Vinyl hose is not resilient and
vulnerable to heat.) The hose
with any crack or loose connection
problem must be replaced with
new
one.
•
When a fuse cock is used, select
the one appropriate for the gas
type and gas amount to be used.
How to adjust shaky legs
•
Adjust the shaky legs by leveling of the legs at four corners on the bottom to ensure the level installation.
Check the type of gas supplied
Gas connection and installation
- 5 -
Installation location
Location without a risk of
falling object
Do not use this appliance in a
location with a risk of falling
object such as under a shelf.
The object fallen on
top of it may burn
and cause fire.
Location without flammable
object such as curtain and
spray can
Do not use this appliance near
curtain or flammable object.
These objects may
catch fire and cause
fire damage.
•
Install the appliance in a location with low humidity to ensure durability.
•
Always ensure the ventilation (air inlet/exhaust) of the place where this appliance is used, and do not block
the ventilation with any object. Be sure to maintain good ventilation while in use. Using this appliance in a
closed location for a long time may cause imperfect combustion due to low oxygen level and, which can
result in carbon monoxide poisoning.
Stable, level location
Do not use this appliance in any
unstable or windy location.
•
Use a gas rubber hose and
make it shorter as much as
possible
(up to 2m with
reasonable
margin) to avoid
twist or bend. Do not place the
rubber hose under the griller.
Avoid contact between hose
and the griller.
•
Push the rubber hose onto
the fitting up to the red line
and secure it with a hose clamp.
•
Gas pipe work requires
specialist qualifications and
expertise. Consult your
dealer.
Example) 00.08 (Manufactured on August 2008)
•
For RGA-410B and RGA-410C,
the connection port diameter is
15A
(R1/2).
<Nameplate>
(Model name)
Confi rm the
gas type
(Type of gas (gas group))
(Distributor)
(Gas consumption)
(Manufactured date)
(Serial No: YS)