18
1.4.6 AUTO mODE (AUTO)
Auto mode will be also indicated by the abbreviation
AUTO
.
The AUTO mode enables the boiler to adapt the regular flow temperature of the heating circuit to the values of the
outdoor ambient temperature, in complete autonomy. The auto mode only works on the heating mode and not on the
production of hot domestic water.
The device periodically monitors the external temperature in order to adjust the internal flow temperature by means of
a sensor: in the cold seasons, the boiler will be able to adjust the heating circuit’s water’s temperature proportionally to
the outdoor temperature reduction; the other way round, the boiler will lower the indoor temperature to adjust it to the
rising outdoor temperature in the warmer seasons.
The device works autonomously, adjusting its own functioning to the actual temperatures of the current season. This
provides a greater domestic comfort while reducing polluting emissions and fuel consumption.
To activate the AUTO mode, perform the following steps.
:
•
Press the button
AUTO
SAVE
on the room-thermostat
once
(
1
):
a light blue symbol will appear on the display
and the
function is activated;
if the heating mode is active, the display will appear as shown in the
figure on the right;
To leave the AUTO mode:
•
Press once the button
AUTO
SAVE
, or the button
.
When AUTO mode is on, the boiler will not consent you
to modify the heating temperature: this value is entirely
automatically managed. AUTO mode has to be disabled to
change the temperature.
1.4.6 ENERGy-SAVING mODE (SAVE)
Energy-save mode will also be mentioned as
SAVE
.
Energy-saving mode exclusively operates on the heating mode and not on the domestic hot water production. When
the SAVE mode is on, the boiler modifies the on/off operation of the burner. The different temperatures that is possible
to set with the chronothermostat are limited (in order to reduce energy consumption). So the maximum selectable
room temperature shall be 20°C and the maximum flow temperature shall be limited to 60°C.
To activate SAVE mode, perform the following steps
:
•
Press the button
AUTO
SAVE
on the chronothermostat
twice
(
1
):
the light blue symbol
will appear on the display and the
mode will be activated;
if the heating mode is active, the display will appear as shown in the
figure on the right;
To deactivate the SAVE mode
:
•
Press the button
AUTO
SAVE
once, or the button
.
Press the button
AUTO
SAVE
more than once and scroll through the
AUTO and SAVE functions as shown in the scheme:
Flow temperature mode
Room temperature mode
MENU
AUTO
ON
OFF
TIMER
ENERGY
MONITOR
SAVE
1
NOTE
Flow temperature mode
Room temperature mode
MENU
AUTO
ON
OFF
TIMER
ENERGY
MONITOR
SAVE
1
NOTE
►
► OFF
Mod. AUTO
Mod. SAVE
