background image

4

2.1  Installation

 

WARNING!

       Only a qualified person must install 

this appliance.

•   Remove all the packaging.

•   Never install or use a damaged 

appliance.

•   The minimum distance shall be kept 

from the other appliances and units as 

instructed.

•   Always wear safety gloves and be 

careful when you move the appliances. 

•   Protect the bottom of the appliance 

from any steam and moisture.

•   Preventing from the appliance to fall, 

never install the appliance adjacent to 

a door or under a window.

•   Sufficient spaces are needs for air 

circulation when the appliance is 

installed above drawers.

Gas connection

•   All gas connections must be made by 

a qualified person.

•   Confirm sufficient air circulation around 

the appliance.

•   Always connect the appliance 

according to the latest installation 

regulations.

2.2  Use

 

WARNING!

       Risk of burns.

•   

CAUTION: 

The use of a gas cooking 

appliance results in the production 

of heat, moisture and products of 

combustion in the room in which it 

is installed. Ensure that the kitchen 

is well ventilated especially when 

the appliance is in use : keep natural 

ventilation holes open or install 

a mechanical ventilation device 

(mechanical extractor hood).

•   

CAUTION : 

This appliances is for 

cooking purposes only. It must not be 

used for other purposes, for example 

room heating.

•   This appliance is intended for use in 

household.

•   Never change the specification of this 

appliance.

•   Do not let the appliance stay 

unattended during operation.

•   Ensure the cooking zone to “off” after 

cooking.

 

WARNING!

      Risk of fire or explosion.

•   Fats and oil when heated can release 

flammable vapors. Keep flames or 

heated objects away from fats and oils 

when you cook with them.

•   The vapors of hot oil releases may 

cause spontaneous combustion.

•   Used oil may cause fire at a lower 

temperature.

•   Never place flammable products or 

items near or on the appliance.

 

WARNING!

      Risk of damage to the appliance.

•   Do not place and keep hot cookware 

on the control panel.

•   Do not ignite the flames with empty 

cookware or without cookware.

•   Be careful not to let objects or 

cookware fall on the appliance. The 

glass top plate can be damaged.

•   Do not place aluminum foil on the 

appliance.

•   Never use unstable cookware with the 

incorrect shape and diameter larger 

than the dimensions of the burners.

•   Make sure the flame does not go out 

when you quickly turn the knob from 

the maximum to the minimum position.

2. Safety Instructions

Summary of Contents for RB-3311D-GBS





















Reviews: