9
WARNING!
* Install the built-in hob in a well ventilated room and keep it away from any combustible
or flammable objects such as paper or oil.
* Place the built-in hob on a stable and level surface.
* If the built-in hob is to be installed close to combustible objects (such as wooden walls,
wooden shelves), it should be installed at least 15 cm from the side walls. Even if the
combustible material is protected by stainless steel sheet, a clearance of 15 cm must be
maintained too. If the surrounding material is fireproof, 15 cm clearance is not required.
The clearance between the appliance and above combustible shelves or the ceiling
must be at least 100 cm.
* (For Mega burner series only) If the oven is installed underneath of hob, it is mandatory
to install the separator in between. The separator must be made out of incombustible
material (eg. metal or plywood).
●
If the separator is placed underneath of the hob, its distance shall be recommended to be kept more
than 150mm away from the surface of kitchen worktop. Please refer to below diagram.
●
Adjust screw position as bench cut out size.
●
Confirm that four screws are secured firmly into the casing.
Table
Casing
Screw
150
1000 (min)
150 (min)
150 (min)
150 (min)
Summary of Contents for RB-3311D-GBS
Page 19: ...19...
Page 20: ...20 http www rinnai com...
