Rinnai New Zealand Limited
Electronic Super Ray Operation and Installation:
10081-B 02-11
8
Remote Control
General operation
Turning the unit on and off
Press and hold the ON/OFF and STANDBY buttons (child lock facility) until the unit beeps.
When turning the unit on it will start the electronic spark. The pilot will ignite first followed by
the plaques (approximately 10 seconds). The heater will start on the high setting.
Low and high setting
Press either LOW or HIGH until the unit beeps.
Standby
To turn to pilot only press STAND-BY until the unit beeps. This function is not used in the day
to day operation of the appliance.
Remote control uses a 9 V alkaline battery
