Rinnai New Zealand Limited
Electronic Super Ray Operation and Installation:
10081-B 02-11
6
General Information
Before operation
Read these instructions to get an overview of how to operate, maintain and service your
Rinnai Electronic Super Ray.
Maintenance and servicing
Maintenance
Although all external covers are made from stainless steel, it should be cleaned regularly to
keep the exterior looking good. This is especially important in coastal areas.
Stainless steel should be cleaned using warm water and a mild detergent. Never use products
containing abrasive liquid cleaners.
Servicing
Rinnai has a service and spare parts network with personnel who are fully trained and
equipped to give the best advice on your Rinnai appliance. If your appliance needs
servicing, please call Rinnai (0800 746 624) from a land line and select option 1 for a
service centre in your area.
For reliable operation Rinnai Super Rays should be serviced every 2 years. If they are in a
harsh outdoor environment or intensively used (for example, in a commercial application),
annual servicing would be beneficial. Regular servicing is not covered by the Rinnai warranty.
If you have any faults or problems, please refer to your installer or contact Rinnai.
Possible damage by radiant heat
This product emits radiant heat, any materials or objects stored near this appliance could
sustain damage.
Safety
High surface temperatures
Please be aware of the high surface temperatures on the heater. Young children should
be supervised at all times. Hand or body contact with the heater must be avoided.
Flammable materials and aerosols
Do not spray aerosols while the appliance is operating. Most aerosols contain butane
gas which can be a fire hazard if used near the appliance.
Do not use or store flammable materials near this appliance.
Obstructions
Do not place articles on or against this appliance.
