background image

Rinnai 10 

EHPA Heat Pump OIM

HIGH ELECTRICITY BILLS
Excessive hot water 

consumption

See entry under the heading ‘Insufficient or no hot water’

HighElectricityTariffs

The electricity tariff will determine the running costs of the system. It is 

important the end user is aware of the applicable tariffs. Contact your 

electricity supplier to confirm what these tariffs are.

Higher Element Usage

In extremely cold conditions the element may be operating more than 

normal. 

WATER FLOW FLUCTUATIONS
One or more hot taps opened 

at the same time

More than one or two hot taps in use at the same time may cause a 

decrease in the hot water flow from the taps.

Is there more than one or two hot taps open, or are appliances such as a 

dishwasher or washing machine, in use at the same time?
Ensure only one or two hot taps are on at one time.

WATER HAMMER
Hot and cold water plumbing in 

the premises

Have a plumber check clipping of hot and cold water pipe work and install 

a pressure limiting valve and water hammer arrestor as required.

HEAT PUMP ICES UP
Defrosting function

The heat pump has a built in hot by pass defrosting function which may 

operate and remove any ice.

SAVE A SERVICE CALL

Summary of Contents for Enviroflo EHPA250VM

























Reviews: