Rinnai Energysaver RHFE-1004FTA, Service Manual

Page: 78 / 112

78 Rinnai Direct Vent Service Manual
Vent Kits for the RHFE 201, 202, 263, 265, 431, 433, 434, 556, 558, 559, 1004 Series
KIT NO. NAME WALL THICKNESS
FOT-150 Vent Kit S 3” to 4-1/2“
FOT-151 Vent Kit A * 4-1/2” to 9-1/2”
FOT-152 Vent Kit B 9-1/2” to 15-3/4”
FOT-153 Vent Kit C 15-3/4” to 23-5/8”
FOT-154 Vent Kit D 23-5/8” to 31-1/2”
* Standard vent kit shipped with appliance.
The exhaust adaptor B assembly, P/N 1004F-530X01, is shipped with every 1004 appliance and must be in-
stalled on the vent termination end every time, even when using extension sets. This allows the same vent
termination kit to be used on all 1004FA models produced in 1999.
Vent Kits for the RHFE 1001FA Series
KIT NO. WALL THICKNESS
FOT-175 or 1001F-1670 3” to 4-1/2“
FOT-176 or 1001F-1671 4-1/2” to 9-1/2”
FOT-177 or 1001F-1672 9-1/2” to 15-3/4”
FOT-178 or 1001F-1673 15-3/4” to 23-5/8”
FOT-179 or 1001F-1674 23-5/8” to 31-1/2”
Vent Extensions for the RHFE 263, 265, 431, 433, 434, 556, 558, 559 Series
KIT NO. NAME
FOT-155 Extension Set - 20”
FOT-156 Extension Set - 40”
FOT-157 Extension Set - 80”
FOT-158 * Elbow Set - 90 Degrees
FOT-190 Elbow Set - 90 Degrees - Long
Vent Extensions for the RHFE 1001 and 1004 Series
KIT NO. NAME
FOT-102 Extension Set - 20”
FOT-103 Extension Set - 40”
FOT-114 Extension Set - 80”
FOT-115 Elbow Set - 90 Degrees
* A maximum of one elbow (FOT-158) may be used on the RHFE-201FA to raise the flue manifold’s position by
6 in (154 mm) relative to the appliance.
Vent Kits and Extensions Sets