Rinnai
7
Electric Panel Heater OIM
UNPACKING THE APPLIANCE
If any damage is evident DO NOT INSTALL or OPERATE and contact your supplier for advice.
WHAT’S IN THE BOX
The package should contain:
•
Heater fitted with flexible cord and plug.
•
A plastic bag containing the wall mounting screws and mounting brackets.
•
Operating and Installation Instructions.
•
Two feet.
•
One remote control.
FEATURES
This heater incorporates the following design features.
DIY Installation
This heater is suitable for Do It Yourself installation.
Silent Operation
Electric element operation eliminates fan noise.
Draft Free
Non fan operation also means no drafts.
Delay Off Timer Function
Equipped with delay off timer, see page 11 for details.
Low Maintenance
No moving parts makes for virtually maintenance free operation.
Tilt Switch
This heater is fitted with a tilt switch that automatically places the heater into standby mode if the appliance tilts
more than 45°.
'Tamper Resistant' Operation
Includes a Lock function designed to prevent accidental operation and small children from altering the heater
settings.
Operation
The heater uses electricity as the heating medium. It operates on the ‘natural convection’ principle where air
from the room is drawn into the ‘air inlet’ louvres at the base of the appliance, is heated inside the appliance
and expelled through the ‘air outlet’ louvres at the top of the appliance without the use of fans. A sophisticated
thermostatic system keeps the room close to the selected temperature.
SPECIFICATIONS
Model
BEPH10DTWF BEPH15DTWF
BEPH22DTWF
Rated power
1000 Watt
1500 Watt
2200 Watt
Rated voltage
240V ~ 50Hz
Water Resistance (IP) Rating /
Electrical Protection Class
IP24 /
Class I
Heater
Dimensions
(mm)
E
F
H
eight
440
440
440
W
idth
756
756
956
D
epth
210
210
210
Unit Weight (kg)
8.8
8.8
11
Installation options
Wall or Freestanding
ABOUT YOUR ELECTRIC PANEL HEATER
