Installation and operating instructions for
Brake HS 215 FHM spring activated
–
hydraulically released
E 09.777e
Issue: 28.05.2021
Version: 2
Drawn: BAHS
Checked: EISF Pages: 28
Page: 8
Important!
If these conditions are not complied with, the caliper
cannot be assembled or will not operate to standard.
Contact RINGSPANN for more details.
First clean the disc tracks with the degreasing agent:
- Quick drying degreaser (CRC / KF)
Important!
BE CAREFUL: The disc must be degreased and free of any deposits so
as not to decrease the friction coefficient.
2.3 Installing the caliper
2.3.1 List of tools
1. 2200Nm torque wrench, socket measuring 55mm across flats (caliper attachment).
2. AF s Flexible pipe inside Ø6mm (Bleed).
2.3.2 Brake handling
Put the assembly in position on the disc, raising it with two lifting eyes Fig. 2.1 and Fig. 2.2.
Weight for one caliper: HS 215 FHM-___ H = 880kg HS 215 FHM-___ R-V = 880kg
2.3.3 Alignment procedure
1. Brake HS 215 FHM-560 R-V Check the disc position 265 +/-12 mm Fig. 2.2. and that the disc
is parallel // 0,3 to the brake pad use the adjustment screw between the casing and the
bottom plate. Check that the support balance in relation to the disc is less than 0,2mm. Check
that the disc is fully between the pads.
2. Brake HS 215 FHM-560 H Check the disc position 20mm mini fixed pad side 2a; 20mm mini
from the other side 2b Fig. 2.3.
