Installation and Operating Instructions for
Brake Caliper DH 012 FEM, cCSAus
spring activated
– electromagnetic released
E 09.766e
Issue: 20.03.2019
Version : 1
drawn:MAYA
checked: Ei
Pages: 16
Page: 2
Important
Please read these instructions carefully before installing and operating the product. Your particular
attention is drawn to the notes on safety.
These installation and operating instructions are valid on condition that the product meets the
selection criteria for its proper use. Selection and design of the product is not the subject of these
installation and operating instructions.
Disregarding or misinterpreting these installation and operating instructions invalidates any product
liability or warranty by RINGSPANN; the same applies if the product is taken apart or changed.
These installation and operating instructions should be kept in a safe place and should accompany
the product if it is passed on to others
– either on its own or as part of a machine – to make it
accessible to the user.
Safety Notice
Installation and operation of this product should only be carried out by skilled personnel.
Repairs may only be carried out by the manufacturer or accredited RINGSPANN agents.
If a malfunction is indicated, the product or the machine into which it is installed should be stopped
immediately and either RINGSPANN or an accredited RINGSPANN agent should be informed.
Switch off the power supply before commencing work on electrical components.
Rotating machine elements must be protected by the purchaser to prevent accidental contact.
Supplies abroad are subject to the safety laws prevailing in those countries.
This is a translation of the German original version!
In case of inconsistencies between the German and English version of this
installation and operating instruction, the German version shall prevail.
