Installation and Operating Instructions for
Brake Caliper DH 012 FEM, cCSAus
spring activated
– electromagnetic released
E 09.766e
Issue: 20.03.2019
Version : 1
drawn:MAYA
checked: Ei
Pages: 16
Page: 13
Bild 8.3
9. Commissioning
Only full-face contact of the two friction blocks (2) on the brake disc as well as a rapid heating of
the friction linings to approx. 200°C will ensure an optimal braking effect. It is therefore necessary
to brake several times and for a short duration when the brake disc is rotating. This process is
finished when the friction surface shows a contact pattern of at least 70 to 80%.
Important!
If the brakes are used as holding brakes, then the braking torques indicated in
the catalogue will not be reached. Reductions of up to 50% of the braking torque
are possible.
Important!
If a running-in process is not possible, the braking torques specified in our
brochure 46 will not be reached. Reductions of up to 50% are possible.
