- 9 -
Fig. 4
Fig. 5
Warning!
Only work with gloves as a protection against hot parts of the
coupling!
•
Mount the hub so that the shaft ends
are flush with the interior borehole
opening (Figure 4).
•
Pay attention to possible differing
agreements.
•
Secure possible available setscrews,
by tightening with an adhesive e.g.
Loctite 222 against automatic loos-
ening and flying out.
ATTENTION!
Let the hot hubs cool off to ambient temperature before the introduction of the inter-
mediate ring.
•
For easier mounting, the elastic
intermediate ring can be provided
with a slip additive (e.g. Talcum)
before introduction
•
Fit the intermediate ring into one half
of the coupling.
•
Push the shaft ends with the
mounted half of the clutch together
(Figure 5).
•
Adjust the coupling according to the
following specifications in “8 Cou-
pling adjustment".
RINGFEDER
®
TNM E
BAWN 001-
GBR
-1
