ring RX144, User Manual

Page: 9 / 58

9
“SPEED+/-”: Adjust the speed. Press the button to adjust the speed when running, or adjust the
data when stop.
SPEED
（
6,10
）
：
Adjust the speed quickly
“/-”: Adjust the incline. Press the button to adjust the incline when running, or adjust the
data when stop.
“INCLINE
（
3,5
）
”
：
Adjust the incline quickly.
Button on left handle bar: Adjust incline;
Button on right handle bar: Adjust speed;
Notice: When any button is pressed, it will be accompanied by a prompt tone. When
the button is adjusted for parameter overrun, it will be accompanied by a long tone
prompt. There is no beep when the button is pressed Invalid.
3. MAIN FUNCTION
Open the power switch, the screen window will light up, the machine will enter into standby state.
3.1. START-UP QUICKLY (MANUAL):
Put safety key, press ‘ START’ button, the treadmill will run at the lowest speed in 3 seconds, press
SPEED+/- to adjust the speed. Press /- to adjust the incline. Press the ‘ STOP’ button or
take out the safety key directly to stop the treadmill.
3.2. COUNT DOWN MODE:
Press the ‘ MODE’ button, you can choose time countdown mode, distance count down mode,
calories countdown mode, and the screen window will show the default data and glitter. At the same
time, press
SPEED+/- and /- to set the data. Press ‘ START ’ button, the machine will run
at the lowest speed, you can press SPEED+/- to change the speed, press /- to change
the incline. When it counts down to 0, the machine will stop smoothly. Certainly, you can press
‘ STOP’ button or take out the safety key from the computer to stop the machine.
3.3. INNER INSTALL PROGRAM:
Press ‘PROG’ button to choose the inner install program from P1----P15. When set the program,
the time window will show default data and glitter, press
SPEED+/- or /- button to set the
running time. Each program has been divided into 16 section, Each exercise time=the setting
time/16. Press ‘START’, the machine will run at the first section speed and incline date. When the
section is over, it will enter into next section automatically, the speed and incline will change as next
section data. When finish one program, the machine will stop smoothly. During the running, you
can change the speed and incline by the
SPEED+/- and /- or Left/right Handrail Button .
When the program enter next section will come back to the default date. And you can press ‘STOP’
or take out the safety key to stop the machine whenever.