Rincent Minidyn V9, User Manual

Page: 29 / 34

Rincent ND Technologies Minidyn User Manual Page 29
3.6 Make measurements
3.6.1 Test measurements
It is possible to make test point without selecting project or report. This is useful to quick
check that your hardware is behaving normally. But in this mode the results and
measurements are not saved and you will not be able to export them.
To do test points just touch the “Measure” button and a temporary project a report will be
created.
3.6.2 Project and report selection
To save measurement you have to create a PV and a report.
3.6.3 Make a measurement
Each measurement point is constituted of several drops (3 by default).
One in acquisition, you can make as many drop you want. Each group of drop (3 by defaults)
will be used to make a new point.
Each time a new points is created, the modulus is calculated and displayed
Figure 22 : Acquisition, before (left), during (middle), after (right).