Rimage Professional 5100N, User Manual

Page: 24 / 180

Maintain the 5000N
2000447_C 21
Gripper Media Diagnostic Test
This tests the disc present sensor that is located inside the lift arm.
1. Press a disc onto the gripper. The sensor beeps and operator panel displays
[1] to show the change in status.
2. Remove the disc . The sensor beeps and operator panel displays [0] to show
the change in status.
3. To exit the test at this point, press the operator button .
To continue with the next sensor test, follow the Lift Home Diagnostic Test
instructions on page 21.
Lift Home Diagnostic Test
This test checks the lift home sensor located at the top of the lift column. The lift
home sensor is blocked when the lift arm is at the top of the lift column.
1. Rotate the lead screw clockwise to move the lift arm up.
When the lift arm is at the top of the column, the sensor beeps and the
operator panel displays [1] to show the change in status.
2. Turn the lead screw counter-clockwise to move the lift arm down. The
sensor beeps and the operator panel displays [0] to show the change in
status.
3. To exit the test at this point, press and hold the operator button .
To continue with the next sensor test, follow the Door Open Diagnostic Test
instructions on page 21.
Door Open Diagnostic Test
This tests the door open sensor located at the bottom front of the frame.
1. Close the door . The sensor beeps and operator panel displays [0] to show
the change in status.
2. Open the door . The sensor beeps and operator panel displays [1] to show
the change in status.
3. To exit the test now, press the operator button.
To continue with the next sensor test, follow the Output Bin Present
Diagnostic Test instructions on page 22.