Rimage Professional 5100N, User Manual

Page: 4 / 180

Introduction
2000447_C 1
Introduction
This manual provides the information needed to operate the Rimage 5100N
and the 5300N and identify the parts. To set up and install your 5100N and the
5300N, refer to the Rimage 5100N and 5300N Setup and Installation Guide
included with your product.
The Rimage 5100N and 5300N are part of the Rimage 5000N series of
autoloaders. Throughout this document the term ‘5000N’ is used to refer to
both the Rimage 5100N and the Rimage 5300N. Any differences between the
autoloaders will be shown.
The 5100N is a robotic-controlled autoloader with one recorder, a two-line display
panel, and an Everest™ printer. The 5100N records and prints discs and then
places the completed discs in the output bin.
The 5300N is a robotic-controlled autoloader with two recorders, five output trays,
a two-line display panel, and an Everest™ printer. The 5300N records and prints
discs and then places the completed discs in the output bin, or in one of the five
output trays.
The 5000N has an embedded control center (PC) and is a network-ready device
that receives orders from other networked computers. You can also operate the
5000N by attaching a monitor, keyboard, and mouse.