Rimage PrismPlus!, User Manual, Page: 18 / 144

15 110635_J
Operate the Prism Printer
Print in Color
Install a multicolor ribbon in the printer. Refer to 1. Change the Print Ribbon on page 19.
Navigate to Print Propertie 2. s . Refer to page 14.
Select the 3. Device Settings tab.
Select the 4. Installed Ribbon setting.
Select 5. Color, Three Panel CMY from the dropdown list.
Note:
The
Double Print
selection is disabled when a color ribbon is selected. Double print is not available during the
color printing process.
Select the 6. Media Type .
Select the 7. Print Strobe setting and set the value anywhere in the range of 375 to 425.
Notes:
These are recommended settings for Rimage brand media.
•
This may require multiple test printings on discs to fine-tune the color hue. Set
•
Enable Color Sub-Strobes to
Enabled to lower an individual color’s print strobe. For example, this setting can be used to lower the Yellow
Print Strobe setting when trying to eliminate a halo effect on a printed disc.
If this is a standalone printer, disable 8. Perfect Print option. This option is only available on select Rimage autoloaders.
Select 9. Halftone Setup Properties to make changes that affect color intensity, color balance, or pattern settings.
Select 10. OK to save the changes and close the Rimage Perfect Image Printer PF Properties window.
Set the Print Quality
Navigate to Print Propertie 1. s . Refer to page 14.
From the 2. General tab, select Printing Preferences . The Rimage Perfect Image Printer PF Printing Preferences window
opens.
Select 3. Advanced . The Rimage Perfect Image Printer PF Advanced Options dialog box opens.
Select the 4. resolution .
Select 5.
OK
. The Rimage Perfect Image Printer PF Advanced Options dialog box closes.
Select 6. OK . The Rimage Perfect Image Printer PF Printing Preferences window closes.
Select 7. OK to save the changes and close the Rimage Perfect Image Printer PF Properties window.
English