Rima RS26G, Manual, Page: 15 / 40

Page 23 of 49
Using a tape measure, take a measurement from the blade to the top of the log bunk on both the left
and right side. The distance should be equal o
n both sides. If it isn’t, you will need to adjust the cable
ends on the right side to either raise or lower the right side. Refer to the step below for adjustment
instructions.
Using a 14mm wrench, turn the nut either clockwise to raise one side of the saw head or counter-
clockwise to lower one side of the saw head. Double check the blade height as discussed in the
previous step. Once the measurement is consistent on both sides, tighten the corresponding nut to
clamp securely against tab.