Rima RS26G, Manual, Page: 12 / 40

Page 20 of 49
Adjustment and operation
1. Rotate (62) adjust the handle to make the saw blade reach the appropriate stretching force.
2. Rotate the saw wheel to check whether the saw blade is off-tracking. If this is the case,
adjust the rear adjustment bolts up and down until qualified
3. The eccentric shaft moves back and forth to make the saw blade's serrations (about 7mm-8mm) The correct distance
4. Install the water pipe on the water tank, and then insert the other end of the water pipe into the hole of the support rod of
the (30) guide frame and fix it