4 How to Use
4-8. Display/setting mode
RX-8000
- 26 -
4-8. Display/setting mode
This mode allows you to change various displays and settings.
Every time the PEAK switch is pressed, various screens are displayed in turn.
NOTE
The gas detector automatically returns to the detection mode in about 20 seconds if the gas detector is left
unoperated.
LCD
display
Detection Mode
↓
Display/Setting Mode
↓
Peak Display
Displays the maximum
concentration (or minimum
concentration for oxygen) detected
during measurement from power-on
to the present.
↓
Full Scale Display/Alarm Setpoint
Display/Alarm Test [Optional setting]
* The gas alarm
function is an
optional setting.
↓
Clock Display
↓
ID Display/Selection
Displays an ID if it has been
registered in advance. Also used to
select an ID.
→
ENTER
switch
ID Display/Selection
=> P27
↓
Log Data Display
Displays concentration data
recorded to the manual memory.
→
ENTER
switch
Log Data Display
=> P28
↓
To Detection Mode
