4 How to Use
4-2. Preparation for start-up
- 17 -
RX-8000
<Connection of Gas Sampling Probe and Gas Sampling Hoses>
Attach the gas sampling hose to the gas sampling probe.
Connect the relay tube, filter tube, gas sampling hose, and gas sampling probe in this order securely to
the gas inlet (GAS IN) of the main unit.
NOTE
Connect each part, such as to the gas inlet (GAS IN), until it
clicks into place to ensure connection.
CAUTION
Use only a gas sampling hose specified by RIKEN KEIKI.
Use the gas detector with the gas sampling probe connected so that no foreign substance is
drawn into it.
Connect a gas sampling probe and a gas sampling hose by fastening them manually without
using any tool. If they are fastened too tightly using a tool, the plastic part of the gas sampling
probe may be broken.
