Riken Keiki GD-1DOX-AS, Operating Manual

Page: 29 / 34

7 Storage, Relocation and Disposal 7-1. Procedures to store the gas detector or leave it for a long time
- 27 -
7
Storage, Relocation and
Disposal
7-1. Procedures to store the gas detector or leave it
for a long time
The gas detector must be stored under the following environmental conditions.
•
In a dark place under the normal temperature and humidity away from direct sunlight
•
In a place where gases, solvents or vapors are not present
7-2. Procedures to relocate the detector or use it
again
When the detector is relocated, select a new place in accordance with "4-2. Precautions for installation
sites" and "4-4. How to install".
For information on wiring, see "4-6. How to wire". The unpowered time must be minimized when the
detector is relocated.
7-3. Disposal of products
When the detector is disposed of, it must be treated properly as an industrial waste in accordance with the
local regulations.
CAUTION
•
When using a relocated or stopped/stored detector again, never fail to perform a calibration.
For information on readjustment including a calibration, please contact RIKEN KEIKI.