Riken Keiki FI-915, Operating Manual

Page: 38 / 74

6 How to Operate in Setup Mode 6-1. Items in Setup Mode
- 38 -
6-1. Items in Setup Mode
The following table shows items that are displayed in the setup mode menu screen. The description
for each item is provided on the subsequent pages.
Selects the measured
gas Sets up the 4 to 20 mA
signal to be input to the
digital reading
adjustment meter Adjusts the 4 to 20 mA
signal to be input to the
digital reading
adjustment meter Tests the input of the 4
to 20 mA signal to the
digital reading
adjustment meter
Sets up the
concentration alarm
function
Tests the concentration
alarm function
Sets up the contact
output operation
Tests the contact output
operation
Performs the reference
calibration Adjusts the offset of the
reading Adjusts the sensitivity of
the reading Sets up the zero
suppression value of
the reading
Checks miscellaneous
measurement values Sets up product
operations for when an
abnormal condition is
detected Sets up product
operations for when a
condition out of
specification is detected Sets up product
operations for when a
condition requiring
maintenance is detected
Sets up product
operations in a function
check state Sets up product
operations in a gas
concentration alarm
state Sets up the
RS-485/Modbus
communication Operates the SD card
Sets up the automatic
reference calibration Setup mode
password change