Riken Keiki FI-915, Operating Manual

Page: 26 / 74

5 How to Operate in Check Mode
- 26 -
5
How to Operate in Check
Mode
"Check mode" is mode to display/check operating states of the sensor, setting conditions of the product,
etc., while continuing measurement. In this mode, measurement is not stopped and the measurement
result is output to output to the 4-20mA gas concentration output signal.
To enter "check mode," press and hold the MODE button for 3 seconds or more in measuring mode to
display the mode change screen, use the ▲▼
buttons to select "CHECK MODE," and then press the
SET button to confirm. This operation displays the check mode menu screen.
To return to measuring mode from the check mode menu screen, press and hold the ESC button for 3
seconds or more.
Measuring mode
For 3
seconds
or more
Mode change screen
Menu screen
Select CHECK MODE using
the ▲▼ buttons