|
13
EN
12
6. ASSEMBLY/DISMANTLING STONE AND OPTIONS
Note
Only work on the unit when the mains plug has been disconnected and the
stove has cooled completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to fall into
the pellet container – they can block the screw conveyor and damage the
stove.
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments.
Select soft bases to prevent scratches to your living space furniture and
stove panels.
Disassembly of the front side casing
Open the lower front panel by simply lifting. The front panel is simply hooked
Open the 2 lower hex screws used to secure the side panel
Open the 2 hex screws and the 2 Allen screws used to attach the two covers.
Lift the covers. Make sure that you disconnect the control unit!
Open the 4 vertical hexagonal screws used to attach the convection fins and lift
the convection fins up and away.
Open the 2 Allen screws used to attach the top panel and lift off the cover
upwards.
Finally, you can loosen the 4 hex screws that are used to fasten the left and
right side panels open, and remove the side panels.
Install the removed parts in reverse order.
#8
#8
#8
3
#8
3
Summary of Contents for Memo
Page 1: ...Operating Manual MEMO ...
Page 4: ...Spare part overview exploded diagram ...
Page 5: ... 5 EN 4 ...
