SCALE INSTALLATION
& ELECTRICAL CONNECTIONS
9
DUMP AIR FROM SUSPENSION SYSTEM
2
Security seal kit p/n 909-SSK must be used to secure the MSU to the vehicle.
For more information on TCA requirements, refer to pages 7-8.
TCA OBM Requirement (Category B only):
Be sure to choose a location that is easily accessible and safe from potential damage
(forklift posts, tire caps, etc.)
DO NOT mount the scale directly to the chassis or any other main
beam unless it is approved by the vehicle manufacturer. Doing so
may void the warranty with the vehicle manufacturer.
CHOOSE LOCATION
1
Mount the bracket in the chosen location
and install the gauge box to the bracket
using supplied hardware.
The 201-EBT-04 scale is designed to be mounted on the outside of a truck or trailer,
however it must still be mounted in a protective enclosure. A protective box and
mounting bracket are included with the 201-EBT-04B.
Make sure to use BOTH supplied mounting bolts to secure the
bracket to the vehicle. Using only one bolt can result in a cracked
bracket and the scale falling off the vehicle.
!
!
