OPERATING MODES
13
Press the UP arrow button to cycle
through the operating modes. To confirm
your selection, turn the scale off by
pressing the ON/OFF button.
With the scale OFF, press and hold both the
UP and DOWN arrow buttons, and then
press the ON/OFF button. Release all 3
buttons. The scale will display the current
mode.
PRESS
HOLDING
PRESS
CHANGING OPERATING MODES
1
2
If using the
Remote Sensor Feature
, the feature must be enabled before setting the
operating mode. For details on enabling the Remote Sensor feature and setting the
operating mode when using this feature, see the 403-SK Instruction Manual
(PP-003-0084).
!
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1
C
LOW
2
3
4
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L KG LBS
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1
C
LOW
2
3
4
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L KG LBS
Each vehicle configuration requires a specific operating mode. The modes available
on this gauge are:
AVG
-Tractor or Trailer, One Axle Group (4 HCV)
S-AVG
- Tractor Drive’s (4 HCV) and Estimated Steer
See the tables on the following pages to find your vehicle configuration and set the
gauge to the corresponding operating mode.
The load scale can only be setup in one operating mode at a time.
If the mode is changed, the calibration data will be reset to factory
defaults, requiring re-calibration
.
