The Right Weigh 201-EBT-04B digital load scale has four internal air pressure
sensors. This scale can monitor a tandem axle air suspension drive group
where all 4 air bags can have differing pressures. The 4 pressures are averaged
together so that a weight can be properly calculated. The scale can also be
used to monitor 4 separate axle groups with 1 height control valve each.
SPECIFICATIONS & OVERVIEW
4
This load scale can be used to monitor one axle group with an air ride lift axle if
the lift axle air bags are controlled by the same height control valve as the other
axles in the group. The scale will need to be setup using multiple calibration
mode. Refer to the Multiple Calibration Mode section for more information.
Drop Axle:
Independently regulated lift axles cannot be considered part of an axle
group and must be in the UP position when calibrating and weighing.
!
The 201-EBT-04B scale is not approved by TCA for use on vehicles with a
drop/lift axle of any kind. For more information on TCA requirements,
refer to pages 7-8.
TCA OBM Requirement:
4 HCVs
