26 |
Page Rigel Medical
SP-SIM
user Manual V2.2
The following variables can be added to the test results:
The default settings on the Rigel SP-SIM include the Site and Location variables. Both
are activated. The drop down box is set to [Yes].
To activate or de-activate each variable, use the up and down keys to select the
variable and the left and right keys to select yes or no.
Once a variable has been activated, the user is given the ability to enter Trace
Variables prior to a safety test by selecting from or adding to the list of default items.
Each variable entered during the automatic test will automatically be added to the list for
future use.
Trace Variables that are de-activated (set to NO) will not appear during the automatic
tests.
Note that a maximum of 40 individual entries are available for each Trace Variable.
Additional entries will overwrite on a first in first out basis.
4.3. System Config
This feature can setup the Rigel SP-SIM to automatically perform certain features
during or after a test as well as allowing the user to set Time and Date preference.
To select System Config, press the
button (F4) followed by Setup in the menu and
System Config from the list as shown below;
