25
Multi-position saddle
To prevent falling and
resulting injury, the
hip corral strap should be used for all
non-weight-bearing clients, or any time
added security is needed.
Attaching
(see fi gure 25a)
• To attach saddle
under upper frame
press button (B) and insert saddle
upright into recess under cross bar.
• To remove saddle
press both button
(A) and safety button (B).
Adjustments
(see fi gure 25b)
• To adjust height
press trigger (C).
• To adjust seat angle
press button (D).
• To adjust seat forward or backward
press trigger (E).
• To adjust hip corral in or out,
or to
attach or remove it, press trigger (F).
• To remove seat
fi rst remove hip corral,
then slide seat using trigger (E) as far
back as possible. Finally, press 2 buttons
on each side (G) to complete removal.
• To adjust hip corral height
press
trigger (H).
• To attach corral strap
clip hook onto
rear of seat. The corral strap as well
as the pads on the hip corral can be
removed, if desired. To remove pads,
undo hook and loop patch between
pads and slide pads off bar. To detach
corral strap, remove pads, then press
small white buttons near end of bar and
pull rings from slots.
Figure 25a
A
A
B
B
Figure 25b
WARNING
Tip:
Every white lever or button
indicates a point of adjustment.
A
A
B
B
C
C
E
E
D
D
G
G
F
F
H
H
