13
Adjustments
(see fi gure 13a)
Loosen knob (A) to:
• Completely remove the hand loop and
clamp.
• Or slide the hand loop toward or away
from the client along the top bar.
To adjust height of hand loop:
• Press button (B) and slide post up or
down to desired position.
• Release button (B) and push hand loop
to engage post.
To tilt hand loop:
Loosen knob (C) and tilt hand loop to
desired position. Tighten knob to secure.
Adjust tilt angle.
To reposition the entire hand loop:
• Completely remove the hand loop from
the Pacer (see fi gures 11a and 11b).
Attach inside or outside the top bar
(see fi gures 12b and 12c).
• Press button (B) and completely remove
the post, now rotate the post to the
desired position, insert it back into
clamp and slide to desired height.
B
B
C
C
Figure 13a
A
A
